EN | DE

Film Dictionary

Color Copy Film

Color copy film for color copiers and laser printers is a special film based on BOPET with a heat-resistant coating for excellent print results. In laser printing, the color pigments are fixed onto the paper or film by heat. Therefore, a film used in laser printers and the coating applied to it must be heat-resistant. This is the case with the BOPET material and the coating used for optimont® copy-laser color copy film. The dimensionally stable film and its clear coating ensure very good toner adhesion as well as razor-sharp prints with high color brilliance. Color copy films are used in offices, educational institutions and for industrial printing processes.

Applications of Color Copy Film

  • high-quality presentations
  • overhead projections
  • technical drawings
  • transparent prints

Paper Backing or Sensor Strip for Color Copy Film

Color copy film is transparent; coated films are also clear, even though the coating may cause slight cloudiness. In printers or copiers that use optical sensors to control paper transport, transparent films may not be detected by the sensors, which can lead to paper jams (actually film jams) or other malfunctions. To prevent such issues, color copy films are offered with a paper backing such as optimont® copy-laser PL or with a sensor strip attached to one side of the film. In optimont® copy-laser PK and SK, the sensor strip is located on the short side of the sheet, while in optimont® copy-laser SL it is located on the long side. Depending on where the optical sensor is positioned in the printer, a suitable color copy film with the sensor strip in the correct position must be used. After printing, the sensor strips or backing sheets can be removed. The printed films can then be used without restriction, for example on an overhead projector.

Processing of Color Copy Film

All copy films and laser printing films in the Bleher range can be processed via single-sheet feed. Stack processing is also possible in both copiers and laser printers. optimont® copy films and laser printing films are cut to the standard formats DIN A4 and DIN A3 using precision sheet-cutting machines. Other common formats such as US letter, special formats or color copy film on rolls are also available.

Heat Resistance and Other Properties of Color Copy Film Made from BOPET Material

All copy films and laser printing films in the Bleher range are heat-resistant up to at least 200 °Celsius. The melting point of BOPET and the copy films produced from it is approximately 265 °Celsius. Therefore, the films can be used in copiers and laser printers from all manufacturers without risk of damaging the device. BOPET is the common abbreviation for “biaxially oriented polyethylene terephthalate,” meaning biaxially oriented PET. Through biaxial stretching (controlled elongation) of the polyester during manufacturing, the physical properties of the PET film are modified. BOPET has high tensile strength and offers excellent mechanical, chemical and thermal stability. The material is transparent. BOPET films shrink only minimally in both the longitudinal and transverse directions during the printing process. The print image hardly distorts, and the printout reproduces the on-screen design precisely.

Different Copy Films in the Bleher Range

  • optimont® copy-laser PL

Crystal-clear, transparent, heat-resistant BOPET film for laser printing applications developed for paper-backed use. The film is coated on one side for monochrome and color toner and is antistatically treated. The backing paper is glued along the long side of the color copy film and can be removed without residue.

  • optimont® copy-laser PK

Crystal-clear, heat-resistant, stack-processable, antistatic color copy film for copiers and laser printers made from one-sided specially coated BOPET film. Glued, removable paper on the short side for laser printers and copiers with optical sheet detection and short-side feed.

  • optimont® copy-laser SL

Crystal-clear, heat-resistant, antistatic and stack-processable color copy film with special coating on both sides made from BOPET material. A removable sensor strip is attached along the long side for devices with optical sheet detection and long-side feed.

  • optimont® copy-laser SK

Stack-processable, crystal-clear, heat-resistant and antistatic color copy film for copiers and laser printers. The base material is specially coated BOPET film on both sides. The removable sensor strip on the short side is designed for devices with optical sheet detection and short-side feed.

  • optimont® laser-color Premium

This clear, transparent, heat-resistant and antistatic color copy film for color laser printers is also specially coated on both sides, made from BOPET film and suitable for stack processing. Unlike all other described color copy films, it has a thickness of 120 µm. The others are available in a thickness of 100 µm.

  • optimont® copy b&w

This clear, transparent, heat-resistant and thermostabilized overhead film made from BOPET material is suitable for black-and-white copiers without an intermediate sheet. The film can be written on with film markers and is 100 µm thick.

Difference Between Copy Film and Laser Printing Film

Depending on the version, copy films are suitable for use in black-and-white or color copiers. Laser printing films are specifically designed to meet the higher demands and quality requirements of laser printers. Laser printing films are downward compatible, meaning they can also be used in standard copiers. The product names indicate the intended application. The designation “copy” stands for copy film. “copy-laser” designates a film suitable for both copiers and laser printers. The designation “laser” indicates a laser printing film.

Sustainability and Environmental Aspects of Copy Film

Copy film is manufactured from PET material. PET is a petrochemical product, but there is a very well-established recycling system for PET materials. The PET recycling system is particularly well developed for PET bottles, over 90 percent of which are recycled in Germany. PET films, including copy films, can also be fed into the recycling loop if they are collected separately or identified and sorted by near-infrared technology during plastic waste sorting. Thus, while PET materials may not earn environmental points during production, they can do so during disposal.

Copy Film from Renewable Raw Materials

There are also efforts to produce the base materials for PET from renewable resources. For monoethylene glycol (MEG), which accounts for about 30 percent of polyethylene terephthalate production, success has already been achieved. MEG can be produced from sugarcane, and this product is already available on the market. Similar research is being conducted for terephthalic acid, which accounts for approximately 70 percent, but no large-scale industrial solution is yet available. There is still a long research path ahead before a market-ready copy film made entirely from renewable raw materials becomes available.

FAQ

What is the difference between copy film for black-and-white printers and color copy film?

Why must copy film be heat-resistant?

What are the paper strips on some copy films used for?

Where are copy films used?

What formats are available for copy films?

Was können wir für Sie tun?

back-to-top